What if there is no power connector?

Imagine what it would be like if there were no battery cables. In this case, the circuit must be permanently connected by continuous conductors. For example, electronic equipment is to be connected to a power source. It is necessary to connect both ends of the connection wire to the electronic equipment and the power source by means of welding Contact) fixed contact car. In this way, whether about production or use, have brought a lot of inconvenience

LED landscape lighting, for example, from the power supply to the lamp holder of the question will generally be larger, if from the power supply to the lamp holder are each line from beginning to end connection, it will bring unnecessary trouble to the construction, and will form a wire junin, some people will doubt, directly from the front of a robbery

Mouth, the conductive part of the wire is connected together, two wrapped on a few layers as if the cell is not enough? It is necessary to use connectors, first of all, insulation tape is mostly simple aging, there is a safe benefit; Secondly, the mechanical properties of the joint directly connected with wires are very poor

A little vibration stretching is very simple to form a circuit, and the interface contact is bad, simple to form a fever, and then cause a fire, not to mention the poor tolerance of the outdoor environment, waterproof and salt prevention and aging requirements will be relatively high, insulation glue far from the requirements, but if the use of high in field lighting

The waterproof connector is not only the device of the power grid, and the safety of all these will be reduced to a very low level

This, for example, briefly explains the benefits of the connector, which makes the planning and production process more convenient, more sensitive, plus security, and reduces the cost of production and protection. Connectors simplify the installation process of electronic products and also simplify batch production

The production process is easy to repair if an electronic component fails, when equipped with connectors can quickly replace the failed component, easy to upgrade and improve technical progress, when equipped with connectors can update the component, with new, more perfect component to replace the old one to improve the sensitivity of the current plan

The use of connection lighting gives engineers greater sensitivity when planning and integrating new products and when building systems with components

Especially for the industrial press, sometimes used in the need to plug and pull out of the harsh environment, sensitivity and safety is more important, this time with a snap of the simple perch pull press will be a correct choice.

Companies adhere to the "people-oriented, the pursuit of excellence" concept, adhere to the quality of survival, to the trust of the principle of development, always quality. And frequency customer interests in the first place, in the same industry unique, enjoy high reputation. The company is willing to make friends all over the world, sincere and people from all walks of life

Shi hand in hand, the pursuit of excellence achievements in the future